Benecheck Glucose Control Solution

Benecheck Control Solutions

The control solutions allow you to check the performance of the meter. The system and strips are performing well is the control test result falls within the indicated control range listed on the test strip vial.

When to Check your System

• When you get your meter for the first time
• When you begin using a box of test strips
• When you suspect the meter or the test strips are not working properly
• When you have more than one unexpected test result
• Any time you bump or drop the meter
• Whenever you suspect that the test results are inaccurate

Directions

1. Insert a test strip into the test port
2. The code number and test mode will appear on-screen-ensure the is the same as the number on the test strip vial
3. Shake the control solution vial vigorously, open the cap to discard the first three drops, then drop the control solution onto a clean object
4. Touch the sample inlet of the test strip to the drop of solution until the meter beeps
5. After the countdown the screen will display the control solution results which you can compare to the range listed on the test strip vial